Phoenix Contact Angled 12P1N12T006X Cable Connector

This is a circular connector, designed for cable-side use, featuring an insulating body made of PBT. It employs CuZn contacts with a Ni/Au contact surface, capable of withstanding 100 insertion/withdrawal cycles. The connector uses a solder cup connection method, is of pin type, and is suitable for signal applications with 12 positions. It rotates in the standard direction and has a 12-pin connection profile. The first contact group has 0 contacts rated for 48 V AC (and 74 V DC), with a 1.5 kV rated surge voltage and overvoltage category III. It can withstand a degree of pollution 3. The second contact group has 12 contacts, 1 mm in diameter, with a maximum litz wire cross-section of 1 mm and a rated current of 8 A. The housing is a cable connector housing with an M23 thread type and an angled design. It locks via a screw locking mechanism and is made of turned parts: copper zinc alloy (CuZn), and die-cast parts: zinc (GD-Zn). The screw connection material is also CuZn, and it offers IP67 protection when plugged in. The external cable diameter ranges from 4 mm to 6 mm, and the seal is made of NBR. It operates within an ambient temperature range of -40C to 125C and permits humidity levels of 50% to 65% during storage/transport. This connector is ideal for confined spaces due to its angled cable outlet, offers adaptability to various applications, ensures safe field use, facilitates flexible on-site assembly, provides consistent EMC protection, and supports proven solder connection technology for various litz wires.